Stirrer Accessories
Chemglass Life Sciences Stirring Shaft, PTFE Covered SS, 410mm OAL, 81mm OD Anchor Style Blade, Fits 300mL Reactors
Stirring Shaft, PTFE Covered SS, 410mm OAL, 81mm OD Anchor Style Blade, Fits 300mL Reactors
Chemglass Life Sciences Replacement Glass Shaft, 100mL and 250mL Internal Spinner Flask
Replacement components for CLS-1414 and CLS-1415 Spinner Flasks.The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.
Chemglass Life Sciences Optional 30mm Stirrer Shaft, Reactor Size: 75L, Fits Support Frame: CG-1968-F-24, Overall Length: 50.3"
30mm Stirrer Shaft, Reactor Size: 75L, Fits Support Frame: CG-1968-F-24, Overall Length: 50.3". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. PLEASE NOTE: CG-2097-75 IS MADE FROM HEAVY WALL TUBING AND HAS INDENTS FOR AGITATOR POSITIONING. INDENTS ARE SPACED EVERY 10¿ FROM THE BOTTOM AGITATOR.REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Button Style, for 12000 to 20000mL Flasks, 725mm OAL
Stirring Shaft, 19mm, Polished, Button Style, for 12000mL to 22000mL Flasks, 725mm OAL. A 19mm precision ground and polished stirrer shaft to fit CG-2086 19mm PTFE bearings. Side button for attachment of CG-2089 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2085.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences Optional 30mm Stirrer Shaft, Reactor Size: 100L, Fits Support Frame: CG-1968-F-24 & CG-1968-F-26, Overall Length: 58.8"
30mm Stirrer Shaft, Reactor Size: 100L, Fits Support Frame: CG-1968-F-24 & CG-1968-F-26, Overall Length: 58.8". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. PLEASE NOTE: CG- CG-2097-100 IS MADE FROM HEAVY WALL TUBING AND HAS INDENTS FOR AGITATOR POSITIONING. INDENTS ARE SPACED EVERY 10¿ FROM THE BOTTOM AGITATOR.REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Ace Glass, Inc. Stir shaft, glass, heavy duty, 75in length, 28mm OD for 150Lcylindrical flasks
Stir shaft, glass, heavy duty, 75in length, 28mm OD for 150Lcylindrical flasks
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Chem-Stir, 50 to 72L Flasks, 895mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Polished, Chem-Stir, 50L-72L Flasks, 895mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground and polished stirrer shaft with our patented Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2086. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2084 ground shaft.PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2084.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 400mm OAL, Agitator OD 50mm, for use with 100-250mL Reactors
Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 400mm OAL, Agitator OD 50mm, for use with 100-250mL Reactors. Shaft is precision ground and polished to fit Chemglass's CG-2077-H, CG-2077-G and CG-2077-U style 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120 apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR CLOCKWISE ROTATION.
Arrow Engineering Gear Driven Overhead Stirrer, Air-Powered Model G5
The Arrow Mixing Products Model G-5 Gear-Driven Air Stirrer is a robust, air-driven solution designed to meet the demanding needs of medium to heavy-duty industrial mixing. Whether you’re mixing liquids, chemicals, or other substances, the Model G-5 delivers reliable performance with enhanced control and efficiency. This 1/2HP Gear-driven mixer has a speed range of 100-1,000 RPM's. The Model G5 comes standard with a 3/8" dia x 12" propeller shaft, 2-1/2"dia 4 Blade propeller & aluminum coupling.
Chemglass Life Sciences Replacement 19mm Stirrer Shaft, Reactor Size: 10L, Fits Support Frame: CG-1965-X-150, Overall Length: 30.6"
Replacement 19mm Stirrer Shaft, Reactor Size: 10L, Fits Support Frame: CG-1965-X-150, Overall Length: 30.6". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.